Estimates, permit packages and feasibility studies. Checked and ready to use.
Every deliverable comes from the same three parts of the EC System: the HVHZ code engine, the product catalog and a 3D model of your building. Our team does the work and hands you the finished document.
Know your number before you bid.
Takeoffs, estimates and schedules of values, with every opening already matched to a product that will pass permit.
Window & door takeoffs and estimates
- Contractors
A window and door takeoff counts and sizes every opening on the drawings; the estimate prices it.
We read your drawings, measure every opening from a 3D model of the building, prepare scope sheets, coordinate manufacturer quotes and price the window, door and envelope scope. Each opening is matched to approved products from the catalog, so the number already reflects what will pass permit. A typical window and door takeoff comes back within 48 hours.
- Format
- PDF + Excel
- Turnaround
- Typically 48 hours for windows & doors
- Get it
- Any done-for-you plan, or a single-project trial
Schedules of values
- Contractors
A schedule of values (SOV) breaks the contract price into line items by CSI division, the basis for billing and pay applications.
Every estimate comes with a structured SOV, organized by CSI division and ready to send to the GC or owner. It uses the same quantities as the takeoff, so the numbers in your bid and in your billing match from the first pay application to the last.
- Format
- PDF + Excel, by CSI division
- Turnaround
- With the estimate
- Get it
- Every done-for-you plan
Bid leveling
- Contractors
Bid leveling puts every subcontractor bid on the same scope, so the bids can be compared line by line.
For contractors who’ve grown into prime-contract, multi-trade work. We take off and price every division you perform, level your subs’ bids against that scope, flag the gaps before they turn into change orders, and coordinate their scopes, quotes and compliance documents.
- Scope
- Every division you perform
- Get it
- Enterprise plan
Paperwork built to survive plan review.
Design pressures, shop drawings, product approvals and the permit package itself, checked against the Florida Building Code and HVHZ requirements before they go in.
Design pressure calculations
- Contractors
- Manufacturers & dealers
Design pressure is the positive and negative wind pressure, in psf, that each window and door has to resist at its spot on the building.
We calculate it for every opening from the ASCE 7-22 wind speed at the exact address, with Florida Building Code overrides and HVHZ status, and check it against each product’s tested rating at that size. Inward and outward are tracked separately. When a package needs a seal, we coordinate it with a partner Florida-licensed professional engineer.
- Basis
- ASCE 7-22 + FBC overrides
- Per opening
- Inward and outward
- Seal
- Partner Florida PE, when required
- Get it
- Compliance plan and up, or in a per-project permit packageCompliance plan and upIn a per-project permit package
Shop drawings
- Contractors
- Manufacturers & dealers
Shop drawings show each product as it will be built and installed on this project, with the approval and design pressures behind it.
We prepare shop drawing packages for windows, doors and other envelope products, converting PDF drawings to CAD where needed. Every opening shows its product, its approval and the design pressures it has to meet. Manufacturers and dealers can order them for a single project with their product applied.
- Format
- CAD + PDF
- Get it
- Compliance plan and up, or per projectQuoted per project, with your product applied
NOA & Product Approval packages
- Contractors
- Manufacturers & dealers
A Miami-Dade Notice of Acceptance (NOA) or a Florida Product Approval (FL#) is the document that shows a product meets code.
Miami-Dade issues NOAs and the state issues FL# approvals; we compile the ones your submittal needs. Each one is checked to be current, to cover HVHZ use and to cover the size being installed, then organized the way plan reviewers expect to see it.
- Covers
- Miami-Dade NOA, Florida Product Approval
- Checked for
- Currency, HVHZ use, tested size
- Get it
- Compliance plan and up, or in a per-project permit packageCompliance plan and upIn a per-project permit package
Permit packages
- Contractors
- Manufacturers & dealers
A permit package is everything the building department needs to review your envelope scope: drawings, approvals and calculations.
We assemble shop drawings, NOA and Product Approval packages and design pressure calculations into one permit-ready set, plus the submittal package for the GC or architect when the job needs one. Everything is checked against Florida Building Code and HVHZ requirements before it goes in.
- Includes
- Drawings, approvals, calculations
- Get it
- Compliance plan and up, or per projectQuoted per project, with your product applied
Know what a building allows before you commit.
Done-for-you studies for residential and light-commercial owners and investors, each with a fixed scope and a fixed fee, and the 3D work behind them.3D scans of existing conditions, and conceptual design with 3D walkthroughs.
Envelope feasibility study
- Owners & investors
An envelope feasibility study tells you which approved window, door and envelope products fit a building’s location and geometry, before a design, a bid or a purchase price commits you.
For a planned shell, or an existing building being renovated or brought up to code. We run the building through the HVHZ code engine and the product catalog and hand you the answer, with the design pressures behind it.
- Format
- Report
- Projects
- Residential & light commercial
- Get it
- Quoted per project
Interior fit study
- Owners & investors
An interior fit study is conceptual design for a build-out: it checks whether a planned use fits an existing space before you commit to it.
We 3D-scan the space, prepare a conceptual layout for the use you have in mind, calculate the utilities that layout and its equipment need, and check it against code. You get the layout, the utility matrix, a code-compliance report and a 3D walkthrough.
- Includes
- Layout, utility matrix, code report, 3D walkthrough
- Projects
- Residential & light commercial
- Get it
- Quoted per project
3D scans
- Contractors
- Owners & investors
A 3D scan captures existing conditions by LiDAR and turns them into a measured 3D model of the building or space.
We scan the jobsite or the space and keep the model in the project record, so takeoffs, layouts and checks start from what is actually there instead of from old drawings.
- Capture
- LiDAR
- Output
- Measured 3D model
- Get it
- Drawn from plan points, or quoted per projectQuoted per project, or inside a study
Conceptual design & 3D walkthroughs
- Contractors
Conceptual design turns a shell model or a 3D scan into a layout, the utility loads its equipment needs and a 3D walkthrough a client can explore.
Our team produces it for Enterprise clients at the plan rate and for owners as part of an interior fit study, and the same model feeds the estimate. Contractors who want to produce it themselves can do it in Studio, in early access, with our team onboarding them on the first project.
- Includes
- Layout, utility matrix, 3D walkthrough
- Get it
- Enterprise, owner studies, or Studio (early access)Enterprise plan, or Studio (early access)
How to get the work.
We do it for you
Monthly plans from Estimation to Enterprise. Our team draws on your monthly points for the deliverables above.
Your team does it
Run the same checks yourself in the EC System, starting free. Pro adds your logo; Studio adds conceptual design, in early access.
List free
Get your products into the product catalog. Free, now and later, and placement is never for sale.
One project
Owner studies, manufacturer packages, and a contractor’s first job as a single-project trial, each quoted per project.
One project
Your first job as a single-project trial: a takeoff and a schedule of values, quoted per project.
One project
Both studies are done for you, with a fixed scope and a fixed fee, quoted per project. Residential and light commercial.
One project
Shop drawings and a permit package with your product applied, quoted per project.
Start with one project.
Hand us a real job. We’ll return a takeoff and a schedule of values as a paid trial, then you decide.
Get your products into the catalog.
Listing is free. Project work is quoted when you need it.